Description
This Air Pump is a high pressure model with 2 different pumping options to enable you to get your SUP / Inflatable to the correct working pressure and rigidity to use it correctly. It features an integrated easy to read gauge in the handle so that you can ensure you get the correct pressure when using it.
It is very easy to use thanks to the large double foot plate and double handle. The mechanism on the pump is a high efficiency design which pumps air on both the up and down stroke.
It also incorporates a sand gauze filter inside the air inlet which can be easily cleaned – this prevents you pumping sand into the valve on you SUP and causing sealing issues.
It can be easily switched between the 2 pumping stages without having to disconnect the inflation hose.
Stage 1 is high volume designed to pump the board up quickly and fill it with air – this is the initial inflation stage ; Stage 2 is high pressure designed to finish pumping the board up with the extra high pressure it needs to get to the correct operating pressure and rigidity.
The two stage pumping is simply switched by a control on the double handle and makes the final high pressure pumping much easier
Dimensions: Height 635mm , Footplate 250 x 110 mm , Handle 250mm , Hose Length 1200mm
Instructions in English , Italian , German , French , Spanish , Chinese
At a glance:
- Easy to use with large foot plates and double handle – requires limited effort to inflate your SUP to high pressure
- 2 stage pumping high volume / high pressure with simple switch control
- Double action, pumps on both strokes
- 2000cm3 capacity
- Pumps to pressure 2.0 bar / 29 psi
- Integrated gauge to monitor pressure during inflation
- Non-corrosive plastic
- Hose length : 1200mm
- Supplied in a plain polybag
Outer Box: 3 x SUP pumps
Reviews
There are no reviews yet.